Initializing network settings, Specifying pjlink settings, P175 – Canon XEED WUX450 User Manual
Page 175: Completing projector settings
Completing Projector Settings
to a Networ
> [Network settings] > [Detailed settings
You can initialize the projector
When [Network setting initialization] is
selected, the window shown below
appears. Select [Yes] then press the
• The following items are initialized.
Settings used for web login, such as the
network setting screen, user name,
password, and other settings
Network password setting
Network function (wired)
Network standby settings
Register network password
E-mail sender address
E-mail recipient address
AMX Device Discovery settings
Crestron RoomView settings
> [Network settings] >
You can turn the PJLink network
function on or off. When the function
is turned on, control is possible via
the LAN using commands that meet
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [On] is the factory default.
• This projector conforms to Class 1 as
defined in the PJLink standards of the
JBMIA (Japan Business Machine and
Information System Industries Association).
This projector supports all commands that
are defined by PJLink Class 1, and has
been verified as conforming to the PJLink
standard Class 1 definition.
• For information about using PJLink, refer to
Disables the PJLink function.
Enables the PJLink function.