Windows vista – Canon XEED WUX450 User Manual
Completing Computer Settings
to a Networ
■ Windows Vista
From the PC [Start] menu, select [Control Panel].
Click on [View network status and tasks].
From the menu on the left side of the window, click on [Manage network
Right-click [Local Area Connection], and open [Properties].
Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
Select [Use the following IP address] and set the IP address and subnet
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
IP address: 192.168.254.1
Subnet mask: 255.255.255.0
When the settings are completed, click the [OK] button and then click the
[OK] button on the [Local Area Connection Properties] window to close it.