Specifying direct power-on, Specifying silence or operating tones, The power cord – Canon XEED WUX450 User Manual

Page 111: P111

Advertising
background image

111

Customizing System Operation (System Settings)

Oper

ation

Setti

ng Fu

nctio

n

s fr
om Me

nus

Specifying Direct

Power-On

> [System settings] >

[Direct power

on]

You can turn on the projector by
connecting the power cable without
pressing the POWER button.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• [Off] is the factory default.

Specifying Silence or

Operating Tones

> [System settings] >

[Beep]

You can select whether a beep
sounds or not when you operate the
projector.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• The factory default is [On].
• The beep will not sound if you mute the

projector sound with the MUTE button on
the remote control.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off

You need to press the POWER button
to turn on the projector.

On

You can turn on the projector by
connecting the power cable only.

• Before enabling direct power on, be

sure to set [Auto power-off] to an
option other than [Disabled].
Selecting [Disabled] will prevent you
from using auto power-off.

• After turning off the projector, wait at

least 5 minutes before turning it on
again. It may shorten the lamp life if
you turn on the projector
immediately after turning it off.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off

Disables the beep.

On

Enables the beep.

Advertising