Install facing in the correct direction, Before installation – Canon XEED WUX450 User Manual

Page 129

Advertising
background image

Before Installation

129

Inst
alla
tio

n

an
d Main

te

nan
ce

Inst
allation

Install Facing in the Correct Direction

When installing the projector facing upward or downward, specify which way the projector
is facing in [Install settings] > [Professional settings] > [Vertical projection]. (

P152

)

10° 10°

10° 10°

10°

10°

The projector can be installed facing any direction*

1

, as shown

below. However, projection upward ( ) or downward ( ) may
shorten the useful life of the lamp. Installation in these orientations
also requires projector settings adjustment. Specifically, for upward
or downward projection, refer to instructions for [Vertical projection]
(

P152

) in the [Install settings] menu.

*1 No optional accessories are available for installing the projector in

ways other than ceiling installation (

P39

,

P132

,

P305

).

*2 Failure to do so may damage the lamp.

Upward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*

2

Downward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*

2

If installing the
projector on the floor
or hanging from the
ceiling, the left / right
inclination of the
projector should be no
more than 10°.*

2

Do not use the
projector standing
on its side. This may
damage the lamp.

Advertising