Adjusting the input signal (total dots), Adjusting the input signal (tracking), Pixels] in [input signal settings – Canon XEED WUX450 User Manual

Page 89: King, Signal settings, Adjusting the input signal, Total dots), Tracking)

Advertising
background image

89

Setting Display Status (Input Settings)

Oper

ation

Setti

ng Fu

nctio

n

s fr
om Me

nus

Adjusting the Input

Signal

(Total dots)

> [Input settings] > [Input signal

settings] >

[Total dots]

You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.

Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.

• Perform this adjustment if the Auto PC

function (

P57

) cannot adjust the projected

image correctly.

Adjusting the Input

Signal

(Tracking)

> [Input settings] > [Input signal

settings] >

[Tracking]

You can fine-tune the timing for
generating an image from the image
signal.
Adjusts the tracking when the image
distorts or flickers.

Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.

• Perform this adjustment if the Auto PC

function (

P57

) cannot adjust the projected

image correctly.

HDMI

Component

LAN

Digital PC

Analog PC

USB

HDMI

Component

LAN

Digital PC

Analog PC

USB

Advertising