Completing computer settings, Setting errors – Canon XEED WUX450 User Manual
Completing Computer Settings
When a setting-related error occurs, the error name is displayed on the screen, and
a “!” mark is displayed next to the input field which caused the error.
The error meanings are as shown below.
Specify the controller’s IP ID.
Specify the controller’s IP address.
Specify the controller’s port number.
A setting outside the valid range was set on the
Password setting error
The set password and confirmation password did
The SMTP server IP address has not been set.
System failed to connect SMTP server.
Failed to connect to the SMTP server when
sending a test mail.
System failed to connect POP3 server.
Failed to connect to the POP3 server attempting
to send a test mail.
System doesn’t support this auth type.
An authentication type was set which is not
supported by the server.
System failed to authenticate.
Authentication failed attempting to send a test
The system failed to send the test mail.
Sending of test mail failed due to a connection
failure with the SMTP server or an error which
does not ordinarily occur.