Canon XEED WUX450 User Manual

Page 246

Advertising
background image

Using the Projector in Classroom Mode

246

(7) Projector pull-down list

Lists connected projectors. Your actions on this window apply to the projector
selected here.

(8) Computers

Lists connected computers. To prepare computers for projection, drag them to
the layout area. Your own computer is listed first.
In

, the computer’s display position is indicated by a white square.

(9) Blank the computer

Pause projection from the computer. Click again to resume projection.

(10) Settings

Display the setting window. (

P272

)

(11) Layout area

Drag computers to this area to assign their projection position.

(12) Computers in layout area

Computers here can be dragged to rearrange them. A number is shown here
only when secondary monitor connectivity is activated on the computer.
Clicking the number will switch between the primary and secondary monitor.

(13) Blank the projector

Pause projection from the projector. Click again to resume projection.

(14) View information

Project information needed by other users to join the session. The IP address
projected is used by one of the projectors in the session.

(15) Start/stop projection

Start projecting by the selected projector. During projection, this button is
labeled [Stop projecting] and can be clicked to stop projection.

(16) Acquire screen layout

Indicates the layout of the selected projectors.

Advertising