Completing computer settings, Specifying an ip address, Windows 7 – Canon XEED WUX450 User Manual

Page 178: P178, Ions in “completing computer settings

Advertising
background image

178

Completing Computer Settings

Specifying an IP Address

Following is an explanation of how to set the PC IP address for each operating
system.

Windows 7

1

From the PC [Start] menu, select [Control Panel].

2

Click on [Network and Internet], then click on [View network status and
tasks].

3

From the menu on the left side of the window, click on [Change adapter
settings].

4

Right-click [Local Area Connection], and open [Properties].

5

Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).

6

Select [Use the following IP address] and set the IP address and subnet
mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address: 192.168.254.1
Subnet mask: 255.255.255.0

7

When the settings are completed, click the [OK] button and then click the
[OK] button on the [Local Area Connection Properties] window to close it.

Advertising