Step 7 set power-saving settings, Set power-saving settings, Step 7 – Canon XEED WUX450 User Manual

Page 73

Advertising
background image

73

Op
er

ation

Pr

oje
ctin

g

an Imag

e

Step 7

Set Power-Saving Settings

Press the ECO button on the remote control to complete power-saving settings.
The following three settings are available.

• Lamp Settings

For changing lamp and fan power consumption in the current image mode.

• Auto Power-Off

A function for automatically turning the power off after a certain period if the
projector is not used and there is no input signal.

• Network Standby Settings

Specify whether network functions should be active in standby mode.

1

Press the ECO button to display the window shown below.

2

Press the [ ] / [ ] buttons to select a menu.
Complete the setting for the selected function. For details, refer to the page
describing each function.
Lamp Settings (

P107

)

Auto Power-Off (

P110

)

Network Standby Settings (

P172

)

Remote control

Advertising