Enabling/disabling the network password – Canon XEED WUX450 User Manual
Completing Projector Settings
the Network Password
> [Network settings] >
You can set whether or not a
password is required in order to
change the projector network
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [On].
Forcibly canceling the
On the Network password input
screen, press the buttons in the
following order to unlock the
settings: [ ] [OK] [ ] [OK] [ ]
[OK]. This will reset the network
password to [ ] [ ] [ ] [ ].
A network password is not used.
A network password is used.