Setup using auto pc, Selecting an input signal – Canon XEED WUX450 User Manual

Page 88

Advertising
background image

88

Setting Display Status (Input Settings)

Setup Using Auto PC

> [Input settings] >

[Auto PC]

Automatically adjusts display
position misalignment and screen
flickering. The adjusted result is
stored in the memory.

Press the OK button to accept your
setting.

Selecting an Input

Signal

> [Input settings] >

[Input signal

select]

You can select a suitable resolution
if the auto PC adjustment function
(

P57

) cannot project the correct

image from a computer.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
Select an input signal corresponding to
the resolution of the computer.

• For the signal types supported by the

projector, see the table on

page 292

.

HDMI

Component

LAN

Digital PC

Analog PC

USB

If the Auto PC adjustment is
insufficient, perform the following
operations.
• Select the input signal that matches

the resolution of the computer from
[Input signal select]. (

P88

)

• If adjustment is insufficient even

when using the above operation,
adjust [Total dots], [Tracking],
[Horizontal/Vertical position] and
[Horizontal/Vertical pixels] in [Input
signal settings]. (

P89

-

P91

)

• For the signal types supported by

the projector, see the table on

page

292

.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Advertising