Specifying a menu position, Showing/hiding the guide screen, P154 – Canon XEED WUX450 User Manual

Page 154: Sition

Advertising
background image

Installation-Related Menu Settings

154

Specifying a Menu

Position

> [Install settings] > [On screen] >

[Menu position]

You can change the position of
menus displayed.

Use the [ ] / [ ] / [ ] / [ ] buttons to
move the menu to the desired position.

After you have moved the menu to the
desired position, press the OK button to
accept your setting, and then press the
MENU or EXIT button.

Showing/Hiding the

Guide Screen

> [Install settings] > [On screen] >

[Guide]

You can select whether to show or
hide the guide screen which explains
operations.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• The factory default is [On].
• The guide screen is shown at the following

times.

-

When no input signal can be detected.
(

P145

)

-

When an invalid button is pressed in the
[BLANK], [FREEZE] or [D.ZOOM] mode.
(

P76

,

P78

)

-

When the positional lock is set to [On].
(

P146

)

-

When the projector is already on and the
POWER button is pressed again.

HDMI

Component

LAN

Digital PC

Analog PC

USB

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off Hides the guide screen.

On Shows the guide screen.

Advertising