Menu configuration – Canon XEED WUX450 User Manual

Page 308

Advertising
background image

Menu Configuration

308

Factory default settings are set according to the following conditions.

*2 • For HDMI (when [HDMI In] is [Auto]), the factory default is [Off].

• For Component, the factory default is [Weak].

*3 • For Analog PC-1/2, Digital PC or HDMI (when [HDMI In] is [Computer]), the factory default is

[Off].

• [Weak] by default for Component or HDMI (when [HDMI In] is [Auto]).

*4 • [Off] by default for HDMI (when [HDMI In] is [Computer]), or for Digital PC, Analog PC (1 or 2),

USB, or LAN.

• HDMI (when [HDMI In] is [Auto]) or COMPONENT: Weak

Advanced adjustment

Ambient light (when Photo/sRGB is

selected)

Off*

P102

Adjust

Type

Tungsten
Fluorescent

Level

L
H

Noise reduction*2

Off

P103

Weak
Middle
Strong

Dynamic gamma*3

Off

P103

Weak
Middle
Strong

Mem. color correct*4

Flesh

Off

P104

Sky

Weak

Green

Middle
Strong

6-axis color adjust

Off*

P104

Adjust

Hue / Saturation /

Brightness

Reset

Fine-Tune Gamma

P105

Iris

Off*

P106

On

Lamp mode

Full power*

P107

Power saver

Reset

OK / Cancel

P107

*: Factory defaults (setting after reset)

Advertising