Specifying the fan mode, Specifying vertical projection, P152 – Canon XEED WUX450 User Manual

Page 152

Advertising
background image

Installation-Related Menu Settings

152

Specifying the Fan

Mode

> [Install settings] > [Professional

settings] >

[Fan mode]

Enable suitable cooling by switching
the fan mode to the setting for low-
or high-altitude (above 2,300 m
(7,545.8')) operation.

When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.

• [Normal] is the factory default.

Specifying Vertical

Projection

> [Install settings] > [Professional

settings] >

[Vertical projection]

You can ensure adequate cooling by
switching the fan mode to suit
upward- or downward-facing
installations.

When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.

• [Off] is the factory default.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Normal

Setting for use in altitudes
lower than 2,300 m (7,545.8').

High
altitude

Setting for use in altitudes of
2,300 m (7,545.8') or higher.

Incorrect settings may shorten the
useful life of the lamp or other parts.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off

Does not alter the fan mode.

Upward

Setting for use when the
projector faces upward

Downward Setting for use when the

projector faces downward

Even if you complete this setting,
vertical projection will result in a
shorter useful life of the lamp and other
parts than horizontal projection.

Advertising