Specifying the lamp mode, Resetting image adjustment settings, P107 – Canon XEED WUX450 User Manual

Page 107

Advertising
background image

107

Adjusting Image Quality (Image Adjustment)

Oper

ation

Setti

ng Fu

nctio

n

s fr
om Me

nus

Specifying the Lamp

Mode

> [Image adjustment] >

[Lamp mode]

Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
You can access the [Lamp mode]
menu by pressing the ECO button on
the remote control.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• The factory default is [Full power].
• The adjustment you have made is stored as

adjusted values for the input signals and
image mode of the current projection.

Resetting Image

Adjustment Settings

> [Image adjustment] >

[Reset]

You can reset the current image
adjustment settings to the default
settings. If reset is performed when
user setting 1–5 is selected for
[Image mode], the settings are
returned to the settings that were
saved in [User 1–5].

• Only the setting for the combination of input

signal and image mode for the current
projection is reset.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Full
power

Projects images at full
brightness.

Power
saver

Reduces lamp brightness to
save energy.

HDMI

Component

LAN

Digital PC

Analog PC

USB

OK

Resets the image adjustment
settings.

Cancel Cancels resetting of the image

adjustment settings.

Advertising