Canon XEED WUX450 User Manual

Page 273

Advertising
background image

273

Completing Application Projection Settings

Netw

orked Multi-Projection

Func

tions in All

Modes

Picture qual setting

Select one of the following options, depending on your
preferred image quality and frame rate.
High

: Projects at a lower frame rate while

emphasizing image quality. Select this
mode if lower image quality is not
acceptable.

Medium : Projection with image quality and frame

rate balanced.

Low

: Projects at lower image quality to maintain

a high frame rate. Select this mode to
reduce the network bandwidth used for
projection.

Real

On

: Projection matching the computer display

resolution. Available under the following
conditions.
When projecting from a single computer—
or during projection from multiple
computers, when projecting an enlarged
image from one computer—at a display
resolution lower than the projector
resolution.

Off

: Automatically adjust the projection size to

match the projector screen size.

Projection type

Normal

: Although some windows cannot be

projected, the cursor on the computer
monitor will not flash.

Advanced : Most windows can be projected, but the

cursor on the computer monitor will flash.
(Only the cursor on the computer monitor
will flash, not the cursor in projected
images.)

Nickname

Nickname specified when creating or joining sessions.
Cannot be changed during sessions. This option is not
shown in Direct or Broadcast Modes.

Multicast address

The multicast address used in Broadcast Mode can
be changed. Use this setting to change the multicast
address if it conflicts with that of other network
equipment. This option is only shown in Broadcast
Mode.

Advertising