Completing computer settings – Canon XEED WUX450 User Manual

Page 182

Advertising
background image

Completing Computer Settings

182

The following information is displayed.

3

Click [Settings] on the web screen.
The password input window appears.

4

Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.

Network Multiple Projection
Download

For downloading the Networked Multi-Projection
(NMPJ) program. (

P211

)

Projector control

Displays the projector control screen.

Settings

Shows the settings screen.

Projector name

The name of the projector on the network

Location

The location of projector installation

MAC address

The MAC address of the projector

IP address

The IP address of the projector

PowerStatus

The power status of the projector

LampModeFullPower

Lamp operating time in [Full power] lamp mode

LampModePowerSaver

Lamp operating time in [Power saver] lamp mode

LampTimeConverted

Lamp operating time (converted value)

FilterTime

Air filter operating time

Alert

Error message (if an error has occurred)

Temperature abnormality
Faulty lamp
Faulty cooling fan
Faulty air filter unit
Faulty power supply

The factory default IP address is “192.168.254.254”. If DHCP settings are used, ask the
network administrator for the projector IP address. It is possible to check the IP address
from the projector menu.

Advertising