Customizing system operation (system settings), Registering user logos, Positioning user logos – Canon XEED WUX450 User Manual

Page 108: Logo capture, P108

Advertising
background image

108

Customizing System Operation (System Settings)

Registering User Logos

> [System settings] > [User screen

settings] >

[Logo capture]

Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

Positioning User

Logos

> [System settings] > [User screen

settings] >

[Logo position]

Specify the position of registered
user logos as follows.

• The factory default is [Center].
• You can specify the position after a logo has

been registered.

HDMI

Component

LAN

Digital PC

Analog PC

USB

OK

Display the image for logo
registration. Align the image with
the red boundary lines indicating
the portion that will be stored, and
then press the OK button. The
portion of the image within the
boundary lines is now registered.

Cancel Cancels logo registration.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Upper L

Indicates the display position
for user logos.

Upper R

Center

Lower L

Lower R

Advertising