Selecting the audio in terminal, Adjusting colors to suit the screen color, P153 – Canon XEED WUX450 User Manual

Page 153

Advertising
background image

Installation-Related Menu Settings

153

Inst
alla
tio

n

an
d Main

te

nan
ce

Inst
allation

Selecting the Audio In

Terminal

> [Install settings] >

[Audio in

terminal select]

You can select the audio in terminal
that is used for each input signal
(HDMI, Digital PC, Analog PC-1,
Analog PC-2, Component).

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• The factory default is as follows.

HDMI [HDMI]
Digital PC [Audio in 1]
Analog PC-1 [Audio in 1]
Analog PC-2 [Audio in 2]
Component [Audio in 2]

Adjusting Colors to

Suit the Screen Color

> [Install settings] >

[Screen color]

You can adjust the color quality of
the images projected according to
the color of the projection screen.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• [Normal] is the factory default.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off

No audio is output.

Audio in
1

Outputs the audio signal that is
inputted in Audio in terminal 1.

Audio in
2

Outputs the audio signal that is
inputted in Audio in terminal 2.

HDMI

Outputs the HDMI audio signal.
(Only for HDMI)

HDMI

Component

LAN

Digital PC

Analog PC

USB

Normal Select this if a standard type of

projection screen is used. The
images are projected in a light
quality similar to that of natural
light.

Greenboard Select this if a greenboard (dark

green color) is used for the
projection screen. The color quality
similar to [Normal] is obtained on
the greenboard.

Adjust Select this to make detailed

adjustment.
The following popup screen will
appear.

Press the [ ] / [ ] buttons to
select a color.
[ ] makes the color selected
darker.
[ ] makes the color selected
lighter.

Advertising