Completing computer settings, Mail authentication settings [mail auth – Canon XEED WUX450 User Manual

Page 188

Advertising
background image

Completing Computer Settings

188

Mail Authentication Settings [Mail auth]

From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Displaying the Network Configuration Screen” (

P181

).

Item

Explanation

Factory default setting

Mail authentication

Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.

OFF

User name

Enter the user name to use for
mail authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).

<Blank>

Password

Enter the password for mail
authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).

<Blank>

Confirm password

For confirmation, enter the
same password as you
entered in [Password].

<Blank>

POP3 server IP address

Enter the POP3 server IP
address in 1-byte numbers.

0.0.0.0

POP3 server port number

Enter the POP3 server port
number in 1-byte numbers (1 -
65535).

110

POP before SMTP response
time

Enter the SMTP authentication
timeout period after POP3
authentication (units:
milliseconds) using 1-byte
numbers (0 - 9999
milliseconds).

300

Advertising