Requiring a password for operation, P116 – Canon XEED WUX450 User Manual

Page 116

Advertising
background image

116

Customizing System Operation (System Settings)

When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.

Requiring a Password

for Operation

> [System settings] > [Other settings] >

[Password settings]

Disables the projector unless the
correct password is entered.

Press the OK button to accept your
setting and then press the MENU
button or EXIT button.

• [Off] is the factory default.
• You cannot set [On] unless you have

completed [Register password].

Once you set a password, the
password entry screen appears at
power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
If the password is valid, the projection
starts. If you enter a wrong password
three times, the power will be turned off.

• The power is also turned off if no password

is input for 3 minutes.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Off

The projector can be used even if no
password is entered.

On

The projector cannot be used unless
you enter your password.

Advertising