Toshiba Tekbright 700P - Manual (Page 100)

101 Establishing an Internet Connection
Client configuration to access the Internet
5.375 x 8.375 ver 2.1
2 Select the LCD panel menu item.
The LCD configuration screen appears.
3 If the Modem Status item is not selected, select it, then
click Apply.
Modem messages should now appear on the LCD panel.
Common modem messages displayed on the LCD panel and
their meanings are listed below (the same messages are used
for the ISDN version)::
Message Explanation
Modem Ready The modem or ISDN adapter is cur-
rently hung up, and ready to dial out
on request, or to accept dial-in net-
working calls.
Dialing <number> The modem or ISDN adapter is cur-
rently dialing the number indicated.
Connect Error The modem or ISDN adapter
attempted to connect to the ISP, but
failed. Reasons may include being
unable to negotiate a baud rate, or
being disconnected by the ISP’s host
computer.
No Carrier The Magnia SG20 dialed a phone
number which answered, but the
modem or ISDN adapter on the other
end did not respond.
Busy The modem or ISDN adapter dialed a
number that was busy.
No dialtone The modem or ISDN adapter did not
detect a dial tone when it attempted to
dial out.
No Answer The modem or ISDN adapter dialed a
number which did not answer.