Toshiba Tekbright 700P - Manual (Page 194)

198 Managing the Server
Configuring a Shared Printer
5.375 x 8.375 ver 2.1
Configuring a Shared Printer
The Magnia SG20 will act as a print server for a local parallel
printer or a networked attached printer. Configuring a printer
in this way allows you to share a single printer for all client
computers in your local network. The Magnia SG20 will
accept print jobs from the client computers, and queue them
to be sent to the shared printer.
Configuration of the shared printer is simple. A direct
connect parallel printer is supported by default. Simply
connect the printer to the Magnia SG20 parallel port and
configure your clients for its use.
Sample shared printer screen
To use a network printer:
1 Connect the printer to one of the ports of the built in
Ethernet switch.
2 Access the Administrative Web site.
3 Click the System tab, and then select the Printer menu
option.
4 Select “Use Network Printer”.
5 Note the IP address of the network printer, and click
Apply to save the settings.