Toshiba Tekbright 700P - Manual (Page 188)

192 Managing the Server
Using the second disk drive
5.375 x 8.375 ver 2.1
9 Close the top of the case and secure it with the two
thumbscrews.
10 Plug in the power cable, reconnect the client computers, and
turn on the Magnia SG20 and the client computers.
If you added a second disk drive, the Magnia SG20 will
recognize the drive.
11 Configure the disk drive.
❖ To configure the disk drive as a backup device or as
additional storage, see
“Configuring the second disk
drive for snapshots” on page 193 .
❖ To configure the disk drive as a primary disk drive
replacement, see
“Installing the second disk drive as
the primary disk drive” on page 195 .
Secondary disk drive usage
A second disk drive can be used in two different ways, depending
on your network needs.
1 A second disk drive can be configured to contain periodic
snapshots of your primary disk drive.
This snapshot mechanism makes a complete copy of the
entire primary disk drive on a periodic basis. If something
goes wrong with your primary disk drive, you can move the
secondary disk drive to the primary disk drive’s slot. The
system will resume operation with all files intact as of the last
time a snapshot was taken. For more information, see
“Installing the second disk drive as the primary disk drive” on
page 195
.