Toshiba Tekbright 700P - Manual (Page 163)

167 Managing the Server
System security modes
5.375 x 8.375 ver 2.1
System security modes
When you set up the first account on the Magnia SG20, you
also setup basic configurations for the server, including
whether to use Ease-of-Use mode, or High Security mode.
Your choice at this time will affect the type of accounts that
are created on the system, and who is allowed to create these
accounts.
❖ Ease-of-Use mode — The SG20 "Client Setup- and
Documentation CD" can create new accounts
automatically when setting up a client. All new accounts
are set (by default) as level two users, giving them partial
access to the Administration Web site.
❖ High Security Mode — The "Client Setup- and
Documentation CD" cannot create new accounts. The
"Client Setup- and Documentation CD" can only set up
client computers using accounts that already exist on the
Magnia SG20. This requires that a user with a level 3
account (see explanation below) create accounts on the
system prior to using the Magnia SG20 "Client Setup-
and Documentation CD".
To determine what security mode the system is currently in,
or to change it, go the Administration Web site, click the
Network tab, and select the Local Network menu item. If the
Enable High Security Mode item is checked, the server is in
high security mode. If it is unchecked, the server is in
Ease-of-Use mode.
To change the mode check (or uncheck) the Enable High
Security Mode item, and click Apply.
NOTE: When accessing the Administration Web site, you may be
asked to log in with a level 3 account and password before
accessing the more secure features of this site.