Toshiba Tekbright 700P - Manual (Page 116)

118 Setting up Email Services
Setting up the Magnia SG20 for local email
5.375 x 8.375 ver 2.1
Setting up the Magnia SG20 for local email
Sample Local email setup screen
Because this is the way the system is configured when you
first setup the Magnia SG20, there is no need to change these
settings to use local email. However, if you had previously
configured the server for Internet email, you can go to this
screen to select local email only.
All user accounts are automatically set up for local email. To
see this, click List Users on the email management screen
(depicted above). This will present a list of all user accounts
and their corresponding email addresses.
NOTE: Changing from Internet to local email only will clear all the
Internet email information on the server, such as POP or SMTP
addresses, user accounts and passwords.
Please note that all accounts are set up with email addresses
that use the Magnia SG20 user account name as the email
address. For example, you could send local email to a user
with the account name “jsmith”
using the address
[email protected] .
If you change the name of the Magnia SG20 (server name
setting in the Local Networking area of the Administrative
Web interface), this will also automatically change the local
domain name used for email accounts. For example, if you
change the name of the server from “myserver” to