Toshiba Tekbright 700P - Manual (Page 80)

81 Setting Up Your Local Area Network
Communicating with the Magnia SG20
5.375 x 8.375 ver 2.1
The appliance is now off and safe to unplug.
NOTE: When the Magnia SG20 is shut down, a small amount of
power may still be supplied within the unit. This power preserves
the last message on the LCD panel, “System Off, Push Power to
Start.”
To shut down the system using the Administration Web Site:
1 From a client computer, click the Admin icon to start the
Administration Web site.
2 Select the System tab, and click the Shutdown tab. Then
select either:
❖ Shutdown the Appliance
The system shuts down and turns itself off.
❖ Reboot the Appliance
The system shuts down, then restarts itself.
When the startup process is complete, the LCD panel displays
the date and time.
Viewing LCD information
The LCD panel can display a variety of information about
your Magnia SG20. The default display shows the date and
time. Several messages may be displayed simultaneously, in
which case some messages appear only when you scroll
through the list of messages.
You can press the Status scroll button on the front of the
appliance to view the Internet IP address and other current
status information.
Urgent messages will display on the LCD panel immediately:
they don’t require use of the scroll button.
To set the LCD to display the status of certain system
conditions: