Sending email through an isp – Toshiba Tekbright 700P User Manual

Page 122

Advertising
background image

124

Setting up Email Services

Setting up the Magnia SG20 for Internet email

5.375 x 8.375 ver 2.1

Sending email through an ISP

The configuration described above enables the Magnia SG20
email server to both send and receive email from your own
domain.

Some domain hosting services only support retrieving mail
(POP3), but do not support relaying email out to the Internet
(SMTP). In this case, you have two options:

Choose not to use the Magnia SG20 for email mirroring –
configure your client computers to interact with the
domain host’s email server directly.

Use the Magnia SG20 email server for incoming email
mirroring only. Send outgoing mail through your ISP
servers.

If you choose not to use the Magnia SG20 for email
mirroring, configure your client computers to access email as
directed by your ISP.

To use the Magnia SG20’s email server to mirror the
incoming email from your domain, but send mail through
your ISP, simply change the SMTP server specified in the
Magnia SG20 email configuration to your ISPs SMTP email
server. This will allow mail for users local to the Magnia
SG20 to stay local (it won’t go to the Internet and back), but
will still send email destined for remote users through your
ISP and on to the final user.

By going to the email section of the System tab, you can type
in the address of your ISP’s SMTP server. Outgoing Internet
email will then be routed through your ISP.

Advertising
This manual is related to the following products: