Toshiba Tekbright 700P - Manual (Page 279)

287 Manually Configuring Clients for the Magnia SG20
Manually configuring clients with Windows NT 4.0, Windows
2000 and Windows XP operating systems
5.375 x 8.375 ver 2.1
Using your current user name and password
Use this procedure if you already have a user name and
password that you wish to use when you log in to the Magnia
SG20.
1 If you haven’t just done so, restart the operating system.
2 Once it has restarted, type the user name and password
that you wish to use to connect to the Magnia SG20.
3 Start Internet Explorer or your preferred Internet browser
application. Type in the address
http://myserver.loc:8282 .
NOTE: The address http://192.168.1.1:8282 may also be used.
4 From the Administration Web site, click the System tab.
5 Once the System page displays, click Users.
The Enter Network Password dialog box appears.
6 If this will be the first user added to the system, type the
user name
applianceadmin and the password toshiba .
If this is not the first user, type the user name and
password of the level 3 user you wish to log in to the
Magnia SG20 as.
7 Click New Account.
If the user you are logged in as is not a level 3 user, the
New Account button does not appear.
8 In the Account Name box, type the user name exactly as
you did to log in to the client computer.
9 In the Password box labeled Password, type the password
exactly as you did to log in to your client computer.
10 Type the information requested in the boxes labeled First
Name, Last Name, and Title for the new user.
11 Set the Account Level as appropriate for the new user.