Toshiba Tekbright 700P - Manual (Page 266)

274 Manually Configuring Clients for the Magnia SG20
Manually configuring clients using the Windows 95, 98 and
Windows Me operating system
5.375 x 8.375 ver 2.1
Using your current user name and password
Use this procedure if you already have a user name and
password that you wish to use when you log in to the Magnia
SG20.
1 If you haven’t already done so, restart the operating
system.
2 Type the user name and password that you wish to use to
connect to the Magnia SG20. The operating system may
require you to confirm the password.
3 Start Internet Explorer or your preferred Internet browser
application. Type in the address
http://myserver.loc:8282 .
NOTE: The address http://192.168.1.1:8282 may also be used.
4 From the Administration Web site, click the System tab.
5 Once the System page displays, click Users.
The Enter Network Password dialog box appears.
6 If you are the first user to be added to the network, type
the user name
applianceadmin and the password toshiba .
If you are not the first user, type your user name and
password you wish to use when you log in to the Magnia
SG20.
7 Click New Account.
If you are logged in as a level 1 or 2 user, the New
Account button does not appear.
8 If you are logged in as a level 3 user, type the user name
in the account name box exactly as you did when you
logged in to your client computer.
9 In the Password box, type the password exactly as you
did to log in to your client computer.