Toshiba Tekbright 700P - Manual (Page 96)

97 Establishing an Internet Connection
Connecting the Magnia SG20 to the Internet
5.375 x 8.375 ver 2.1
❖ Whether your ISP uses PPPoE (PPP over Ethernet) to
connect to its network. If so, you may need to enter an
account name and password.
❖ If your ISP has given you a static IP, you will also need
the following information:
❖ IP address
❖ Subnet mask
❖ Primary DNS Server
❖ Secondary DNS Server (optional)
❖ Default gateway (optional)
❖ The Magnia SG20 establishes a default computer name
to be used with the public Ethernet port. Some ISPs
require that you assign your computer a name that they
specify. If your ISP does this, you will need the specific
computer name in addition to the static IP information
indicated above.
To configure your system for DSL-based access to the
Internet:
1 Connect the DSL modem to the public Ethernet port at
the back of the Magnia SG20 using a standard Ethernet
(CAT5) cable.
2 From a client computer, click the Admin icon to start the
Administration Web site. Select the Network tab.
A screen describing your current configuration appears.
3 Click the Configure hyperlink next to the Internet
Connection section.
This will take you to the screen where you can select the
type of Internet connection to use.
4 Select DSL Modem and click Next.
The ISP information screen appears.