Toshiba Tekbright 700P - Manual (Page 26)

26 Getting Started
Connecting the first client computer using the seven LAN ports
5.375 x 8.375 ver 2.1
During the startup process, the Magnia SG20’s LCD displays
a “warming up” message.
When the startup process is complete, the LCD displays a
date and time message.
The Magnia SG20 is ready for you to connect the first client
computer.
Connecting the first client computer using the
seven LAN ports
The first step in setting up your Magnia SG20 is to connect a
client computer and configure the computer to access the
server.
Using the network cable, connect a desktop or notebook
computer to one of the seven LAN ports of the built-in switch
on the back of the unit.
A client connected to the Magnia SG20
LAN ports