Toshiba Tekbright 700P - Manual (Page 209)

215 Advanced Networking Features
5.375 x 8.375 ver 2.1
Changing the workgroup name will effect where the server
appears on the network neighborhood.
Changing the Local IP Addresses
NOTE: If you change the Private IP address range, then the
Administrative screen (at 192.168.1.1) is no longer active. This
address cannot match the public WAN port address.
The Magnia SG20 comes with the local network (for client
computers connected to the built in switch) set up in the
following way:
❖ Magnia SG20 local IP is 192.168.1.1
❖ DHCP server is on
❖ Subnet mask is 255.255.255.0
❖ DHCP range is from 192.168.1.2 through 192.168.1.238
These settings can be changed in the following way:
❖ A new IP address range can be defined (including a new
IP address for the Magnia SG20)
❖ A new address can be defined for the local Magnia SG20
port
❖ A new subnet can be defined
❖ DHCP can be turned on or off (allowing clients to use
static IP addresses)
To adjust these settings, go to the Administrative Web site,
click on the Network tab, and select the Local menu option.
Click on the Advanced button. The screen displaying the
current advanced network settings will appear. Click on the
Customize hyperlink next to the Private Address Settings
section.