Toshiba Tekbright 700P - Manual (Page 192)

196 Managing the Server
Using the second disk drive
5.375 x 8.375 ver 2.1
1 Turn off the Magnia SG20 by pressing the
Power/Shutdown button on the front of the unit, or by
using the system shutdown feature of the Administration
Web site, and disconnect the power cable.
2 Remove the top cover by unscrewing the two
thumbscrews at the rear of the appliance and sliding the
cover back.
Removing the cover
3 Release the secondary disk drive by loosening the
thumbscrews, then remove the disk drive by sliding it
back and lifting it out.
4 Release the primary disk drive by loosening the
thumbscrews, then remove the disk drive by sliding it
back and lifting it out.
5 Set the primary disk drive aside.
6 Place the secondary disk drive in the primary disk drive’s
mounting rails and slide it forward. Ensure that the disk
drive’s connectors engage firmly with the chassis
connectors. Secure the disk drive with the two
thumbscrews (do not over tighten).