Toshiba Tekbright 700P - Manual (Page 146)

149 VPN Configuration and Usage
Connecting to the VPN
5.375 x 8.375 ver 2.1
1 Open the Windows Start Menu on the Windows Taskbar.
2 Select Settings>Control Panel to display the Windows
Control Panel.
3 Double-click the Networking icon.
The Networking dialog box displays.
4 Click on the tab labeled Protocols.
5 Click the Add button.
The Select Network Protocol dialog box displays.
6 From the Network Protocol list, select the item named
Point To Point Tunneling Protocol, then click the OK
button.
A dialog box asking the Number of Virtual Private
Networks displays.
7 The text box should have the number 1 in it.
8 Click the OK button and a confirmation dialog box
displays.
9 Click the OK button to display the Remote Access Setup
dialog box.
10 Click the Add button to display the Add RAS Device
dialog box.
11 Select the item labeled VPN-RASPPTPM in the
drop-down list labeled RAS Capable Devices, then click
the OK button.
After configuration is complete, Windows NT will
restart.
Configuring Network Settings
Once you have a properly installed the VPN adapter, the only
remaining network setting that is required for your client