Toshiba Tekbright 700P - Manual (Page 241)

248 If Something Goes Wrong
Problems when you turn on a client computer
5.375 x 8.375 ver 2.1
and password used to login to the client machine match a user
account on the Magnia SG20.
If the user name is not listed on the Administration Web site’s
Users page (which is under the System tab), then you may
wish to run the Client Setup Wizard to configure your client
computer to work with the Magnia SG20. Insert the Magnia
SG20 "Client Setup- and Documentation CD" and see
“Connecting the first client computer using the seven LAN
ports” on page 26
.
The client computer displays a message indicating that it
cannot reconnect to the Magnia SG20 or the server is
unavailable.
The Magnia SG20 may be turned off. It must be turned on
before you turn on a client computer.
I get a message about a missing shortcut.
You may have received this message, “The drive or network
connection that the shortcut ‘netconnectwizard.lnk’ refers to
is unavailable. Make sure that the disk is properly inserted or
the network resource is available, and then try again.”
The client computer could not connect properly to the server.
Run the Magnia SG20 "Client Setup- and Documentation
CD" again.
I can’t find my files that I placed on the Magnia SG20.
The files are in a private folder, and you cannot view it from
your current logged in account. Log out and log back in with
the proper login account name.