Toshiba Tekbright 700P User Manual
Page 139
142
VPN Configuration and Usage
Configuring a Client Computer
5.375 x 8.375 ver 2.1
When your settings are verified, the VPN Client Setup
program installs and configures PPTP and RAS.
TECHNICAL NOTE: If you are running a client configuration
diskette on a Windows NT system, additional dialog boxes not
shown in this section may appear. These dialog boxes are not part
of the VPN setup process. You will be unable to select them with
your mouse. You can close the extra dialog boxes by simply
pressing the Enter key.
TECHNICAL NOTE: TVPN setup may request that you insert your
Windows CD so that PPTP and RAS can be installed and
configured. See
for information about
these technologies.
After PPTP and RAS configuration are complete, the
wizard will prompt you to restart the computer.
4
Remove the diskette before restarting.
5
Click Restart Now to restart the computer. If no
selection is made, the computer will restart automatically.
TECHNICAL NOTE: If Restart Later is selected, the VPN setup will
not be complete and the VPN setup wizard will resume after your
next restart.
After restarting, the VPN setup program runs again to
complete the final configuration.
When configuration is complete, the client computer is
ready to use the VPN.