Connecting to an existing corporate network – Toshiba Tekbright 700P User Manual

Page 84

Advertising
background image

85

Setting Up Your Local Area Network

Connecting to an existing corporate network

5.375 x 8.375 ver 2.1

Connecting to an existing corporate network

Instead of connecting the Magnia SG20 to the Internet, you
can connect it to another local network. This is useful if the
other network has Internet access, or if you need to transfer
files between the Magnia SG20 and the corporate LAN.

Using a suitable cable, connect the corporate LAN to the
Magnia SG20’s public Ethernet port.

Locating the Ethernet ports on the Magnia SG20

NOTE: Do not connect the LAN to any of the private ports. This
action may affect LAN performance. Use only the “public” port for
LAN connection.

Configure the Magnia SG20 to the corporate LAN option. If
you do this when setting the server up for the first time, you
can select this option through the Server Setup Wizard.

If you have already set up your system, use the
Administration Web site to configure the Magnia SG20.

1

Click the Network tab. Make sure the Internet menu has
been selected.

2

A screen appears confirming your Internet connection
type and configuration. Select the Internet Connection
Configure
option.

3

Select the Corporate LAN or Cable Modem option.
Click Next.

Connect the corporate LAN to this port

Advertising
This manual is related to the following products: