Toshiba Tekbright 700P - Manual (Page 94)

95 Establishing an Internet Connection
Connecting the Magnia SG20 to the Internet
5.375 x 8.375 ver 2.1
❖ The Magnia SG20 establishes a default computer name
to be used with the public Ethernet port. Some cable ISPs
require that you assign your computer a name that they
specify. If your ISP does this, you will need the specific
computer name in addition to the static IP information
indicated above.
To configure your system for cable-based access to the
Internet:
1 Connect your cable modem to the public Ethernet port at
the back of the Magnia SG20 using a standard Ethernet
(CAT5) cable.
2 From a client computer, click the Admin icon to start the
Administration Web site. Select the Network tab.
A screen describing your current configuration appears.
3 Click the Configure hyperlink next to the Internet
Connection section.
This takes you to the screen where you can select the type
of Internet connection to use.
4 Select the Cable option and click Next.
The ISP information screen appears.
Sample ISP information screen