Toshiba Tekbright 700P - Manual (Page 37)

37 Getting Started
Configuring the Magnia SG20
5.375 x 8.375 ver 2.1
2 Enter the secondary DNS and Gateway addresses, if your
ISP provides them. Otherwise, leave these fields blank.
Click Next to continue.
If you selected DHCP on the ISP address type screen, the
computer name screen appears. This screen assigns the
Magnia SG20 a specific computer name that is used only
when communicating with your ISP’s DHCP server.
3 If your ISP has provided a specific computer name, type
the name in the computer name field. Otherwise, leave
the field empty.
If you leave the computer name field empty, the server
automatically assigns a computer name.
When configuring broadband using DSL, you can also
enter a username and password. This is used if your ISP
uses PPPoE for its connection protocol.
DSL configuration also allows you to select the idle
connect timeout value. Don’t change the idle connect
timeout value from the default “Never” unless you pay
for DSL connect time by the minute.
4 Click Next to continue.
A verification screen appears.
5 If all entries are correct, click Next to save your settings.
6 Click Finish to end the server setup process.
Dial-up connection
NOTE: Some phone-based ISPs require special software to access
their networks. These ISPs include America Online
® , and any free
ISP that requires advertisements to be downloaded and displayed
on your client computer while connected. These ISPs cannot be
used with the Magnia SG20.
For a dial-up connection: