Toshiba Tekbright 700P - Manual (Page 95)

96 Establishing an Internet Connection
Connecting the Magnia SG20 to the Internet
5.375 x 8.375 ver 2.1
5 If your ISP assigns an IP address each time you connect,
select the DHCP option. If your ISP has assigned you a
specific IP address, select Static IP Address, and type in
the additional information.
The Magnia SG20 automatically assigns a computer
name. You can change this if your ISP uses DHCP and
requires a specific name for your computer.
6 When you have finished entering the information, click
Next.
A confirmation screen showing your current settings
appears.
7 If these settings are correct, click Test.
The Magnia SG20 will use the settings to connect to the
Internet through the cable modem. It will then attempt to
contact several well-known Internet sites.
8 When the Magnia SG20 reports that this process is
successful (which may take a minute or two), click
Finish.
NOTE: Your configuration changes are not made permanent until
you click Finish.
Configuring for DSL-based Internet service
DSL (Digital Subscriber Line) service is available from
various ISPs. It can provide always connected and extremely
fast (broadband) access to the Internet. You can connect the
Magnia SG20 to a DSL modem using its public Ethernet port.
When configuring the Magnia SG20 for a DSL Internet
connection, you will need information such as:
❖ Whether your ISP has provided a specific IP address
(static IP), or whether your server will obtain a new IP
address each time it connects (DHCP). If you don’t know,
use DHCP or call your ISP.