Toshiba Tekbright 700P - Manual (Page 186)

190 Managing the Server
Using the second disk drive
5.375 x 8.375 ver 2.1
2 Turn off the Magnia SG20 by pressing the
Power/Shutdown button on the front of the unit, or by
using the system shutdown feature of the Administration Web
site, and disconnect the power cable.
3 Undo the two thumbscrews on the rear of the Magnia
SG20.
4 Slide back the top of the case.
Removing the cover
5 Locate the slot for the disk drive. Facing the unit from the
front, the primary disk drive slot is on the right, and the
secondary disk drive slot is on the left.
6 If you are replacing a primary disk drive:
❖ Remove it by unscrewing the two thumbscrews.
❖ Slide the disk drive back and lift it out.
❖ Remove the drive from the disk drive from the drive
cage by unscrewing the four mounting screws.
❖ Continue at step 8 .