Toshiba Tekbright 700P - Manual (Page 99)

100 Establishing an Internet Connection
Client configuration to access the Internet
5.375 x 8.375 ver 2.1
Client configuration to access the Internet
We strongly recommend that you use the Magnia SG20
"Client Setup- and Documentation CD" to configure your
local client computers. If you do this, your client computers
will automatically be configured to use the Magnia SG20 as
their gateway to the Internet. No further configuration
changes should be necessary.
If you choose to configure your client computers manually to
access the Magnia SG20 (without the "Client Setup- and
Documentation CD"), see
“Manually Configuring Clients for
the Magnia SG20” on page 261 for complete instructions.
Dial-out modem / ISDN usage
The modem or ISDN on the Magnia SG20 can be used for
either dial-out access to the Internet through an ISP, or dial-in
access to the local network. While you can configure it for
use in both these ways, the modem or ISDN adapter cannot
handle both incoming and outgoing connections at the same
time. Configuring the modem or ISDN adapter for outgoing
Internet connectivity can keep it busy for significant periods.
Please note that the features described below may not appear
on your Administration Web site if you have not configured
an Internet connection using the modem respectively using
ISDN.
Viewing modem or ISDN status
Checking modem or ISDN status can help you to identify
why it is currently in use, or to troubleshoot problems
connecting to ISPs. You can see what the modem or ISDN
adapter is currently doing in several ways.
The quickest way to view the current status is on the LCD
screen. To make sure modem or ISDN modem messages have
been turned on for the LCD:
1 From a client computer, click the Admin icon to start the
Administration Web site. Select the System tab.