Configuring wireless access, Determining if wireless access point is installed, Configuring wireless features – Toshiba Tekbright 700P User Manual

Page 39

Advertising
background image

39

Getting Started

Configuring wireless access

5.375 x 8.375 ver 2.1

Configuring wireless access

The Magnia SG20 offers a built-in wireless access point
option. This option enables you to use the server as a wireless
access point for your local network. With this option, you can
provide both wireless 11-Mbit and wired 100-Mbit local
network access.

Wireless clients can easily access your network, with all of
the same features and capabilities as clients directly wired to
the seven internal LAN ports. Using the wireless access point
option provides immediate, easy and fast expansion of your
network with unparalleled flexibility.

To make your Magnia SG20 work as a wireless access point,
purchase the Toshiba wireless PC card (optional). This is an
easy customer installable feature.

Determining if wireless access point is installed

To determine if the wireless access point option has been
installed on your Magnia SG20, open the Administration
Web interface, and click the Network tab. If wireless access
point is not installed, a screen indicating that wireless access
point is not available appears.

If wireless access point is installed, a configuration page
appears that enables you to configure the wireless features.

Configuring wireless features

When the wireless access point option is installed in the
Magnia SG20, wireless access should be possible using the
configured defaults. However, it is recommended that you
review the wireless configuration and modify it as necessary.

1

Open the Administration Web site, click the Network
tab, then select Wireless.

The wireless configuration screen appears.

Advertising
This manual is related to the following products: