Toshiba Tekbright 700P - Manual (Page 83)

84 Setting Up Your Local Area Network
Communicating with the Magnia SG20
5.375 x 8.375 ver 2.1
Viewing health information
The Magnia SG20 monitors hardware health indicators to
identify potential problems. This important health
information is available for you to view.
To view the “health” (current operational status) of the
Magnia SG20, select the Reports tab, and click the Health
tab.
The system health window appears.
The green bullet to the left of each item indicates that the
appliance is operating without a problem. If a problem is
detected, the bullet will turn yellow. Click each item for
further information.
Two types of hard disk drive information are monitored.
SMART drive status is an internal drive feature that allows
the drive to monitor itself and predict if a problem will occur.
Total available hard drive space is reported.
Fans are also monitored for health. If a fan fails or begins to
run too slowly, the health monitor reports this.
The internal temperature of the Magnia SG20 is monitored at
two different locations. If the temperature exceeds the normal
limit, the health monitoring screen will indicate this. The
LCD panel will also indicate this problem.
NOTE: High internal temperatures in the Magnia SG20 can usually
be corrected by ensuring the unit is in a well-ventilated area and
the fan openings are not blocked.
Internal voltages are monitored to assure sufficient power
supply. If the voltage exceeds normal limits, it will be
indicated here.