Toshiba Tekbright 700P - Manual (Page 77)

78 Setting Up Your Local Area Network
Communicating with the Magnia SG20
5.375 x 8.375 ver 2.1
Once connected to the Magnia SG20 by modem or ISDN,
users can do anything that they were able to do when
connected locally including access public and personal files,
make backup copies, and print to the network printer.
Communicating with the Magnia SG20
The Toshiba Magnia SG20 Appliance Server is a highly
reliable and simple to use device. It does not have
connections for a monitor or keyboard and cannot be
significantly altered by adding options or additional
hardware. All management of the Magnia SG20 is performed
through the Administration Web site.
Accessing the Administration Web site
The Magnia SG20 doesn’t support the connection of a
monitor or keyboard. Instead, you use your Web browser on
one of the client computers to access both the built-in intranet
Web site and the Administration Web site, which stored on
the Magnia SG20’s hard disk drive.
If you used the Magnia SG20 "Client Setup- and
Documentation CD" to set up the client computer, an icon on
the desktop labeled “Admin” provides access to the
Administration Web site.
To access the Administration Web site, click the Admin
icon on the client computer’s desktop. If the client computer
does not have this icon, direct your browser to the
following URL: http://myserver:8282 (you can also use
http://192.168.1.1:8282).
Be patient when accessing the Administration Web site. Like
any other Web site, it may take a few seconds to load.
Access to the Administration Web site is restricted to level 2
and 3 user accounts. When the Magnia SG20 is set up in
Ease-of-Use mode (default), all accounts are at least Level 2.
Some areas of the Administration Web site are restricted to
Level 3 users. If you attempt to enter these areas, you will be