If something goes wrong, Problems when you turn on the magnia sg20, Chapter 11: if something goes wrong – Toshiba Tekbright 700P User Manual
Page 238: Problems when, Chapter 11
245
5.375 x 8.375 ver 2.1
Chapter 11
If Something Goes
Wrong
Some problems you may encounter when using your Toshiba
Magnia SG20 Appliance Server are relatively easy to identify
and solve. Others may require help from your dealer or
Toshiba.
Problems when you turn on the Magnia SG20
The LCD panel remains dim and does not brighten.
Make sure you attached the power cable properly at both
ends.
Unplug the Magnia SG20 and plug it back in again.
The LCD display brightens, but does not display the
“Magnia SG20” message.
The initial power to the Magnia SG20 did not fully trigger the
warming up process. You should unplug the Magnia SG20,
and then plug it back in. If the problem repeats itself, use a
pen or paperclip to push the reset button that resides inside
the tiny reset hole on the back panel of the Magnia SG20.