Toshiba Tekbright 700P - Manual (Page 90)

91 Establishing an Internet Connection
Connecting the Magnia SG20 to the Internet
5.375 x 8.375 ver 2.1
5 Type in your ISP’s phone number, account, and
password.
The optional setting section allows you to enter your
ISP’s DNS server information. This is not usually
required, because most phone-based ISPs provide this
information to your server automatically when it
connects. However, if your ISP gives you this
information, type it here. The check box to log in to
network is used only in rare circumstances.
6 When you have finished entering the information, click
Next.
A confirmation screen showing your current settings
appears.
7 If these settings are correct, click Finish.
NOTE: Your configuration changes are not made permanent until
you click Finish.
Once configured for dial-up phone access, the Magnia SG20
will dial your ISP and connect to the Internet whenever any
client computer connected to it (and properly configured)
attempts to access the Internet. This can happen when a client
computer accesses a Web site, checks email, accesses an FTP
site, or runs a program that attempts to access the Internet
(such as RealNetworks™ RealPlayer™).
Once the Magnia SG20 connects to the Internet using a
dial-up service, it will typically remain connected for 20
minutes after the last Internet access. If you wish to
disconnect the phone sooner than this, you can do so
manually. For more information, see
“Hanging up or
disabling the modem or ISDN adapter” on page 102 .
Configuring for ISDN-based Internet service
If you have the SG20 ISDN version you can connect the
Magnia SG20 to an ISDN line. When configuring your