Toshiba Tekbright 700P - Manual (Page 254)

262 Manually Configuring Clients for the Magnia SG20
Manually configuring clients using the Windows 95, 98 and
Windows Me operating system
5.375 x 8.375 ver 2.1
Manually configuring clients using the
Windows 95, 98 and Windows Me operating
system
To access the Magnia SG20, you need to configure:
❖ The network card
❖ Network settings
❖ Web browser
Have your original operating system installation CD
available. Many of the settings require this CD to complete
the configuration.
NOTE: Some of the steps may require restarting the client
computer. Therefore, before starting the configuration, shut down
any other software that is currently running to avoid conflicts or
loss of data.
Determining if your system has a network interface card
(NIC)
If the client computer has no NIC (sometimes also called a
network adapter), the first step is to install one. You need to
have ready both the driver diskette that came with the card
and your Windows
®
operating system setup CD.
There are three ways to determine if the computer already has
a NIC installed:
❖ Physical signs
❖ Desktop signs
❖ Control Panel signs