Toshiba Tekbright 700P - Manual (Page 62)

62 Using the Network
Sharing a printer
5.375 x 8.375 ver 2.1
Connecting a client computer to the network printer
Although the screen displays vary slightly between the
different Microsoft Windows operating systems, the way you
configure the network printer is much the same. You will
probably need the device driver diskette or CD that came with
the printer, as well as your original Microsoft Windows Setup
Disk.
General Windows procedure
Follow these steps to connect your client computer to the
Magnia SG20 printer.
1 From the Windows Start menu, select Settings, then
Printers.
The Printers folder appears on your desktop.
2 Double-click the Add Printer icon. It should be the first
icon displayed.
3 When the Add Printer Wizard appears set these options:
❖ For Is the printer attached to your computer?
select the setting Network printer.
❖ For Network path or queue name, type
\\Myserver\printer .
If the name of your Magnia SG20 has been changed
from the default “Myserver,” substitute the new
name.
❖ For Manufacturer and Printer, select from the lists
provided.
To use your device driver diskette, click Have Disk,
and follow the directions on screen.
4 Print a test page to verify that the printer is configured
correctly.